Update Firmware Samsung Galaxy GT-i9003

SPECIAL to upgrade FW that only use the PDA file (not PDA + PHONE + CSC)

 1. download the firmware, extract the file (I9003DXKB2.rar) become I9003DXKB2-I9003DXKB2-I9003OLBKB2_HOME.tar
download Odin,
download driver (if there are already Kies, no need to donwload the driver).
if the file requested pessword, pasword? samfirmware.com? without a question mark

2. install drivers (if necessary), then run Odin. Do not forget to close the Kies.
3. go into download mode
turn off hp-> unplug the battery, sim, sdcard-> plug the battery-> push and hold the [volume down] + [home] + [Power] -> wait until the picture came out green robot holding a shovel
4. Plug the data cable to phone and computer (preferably is laptop, in case a sudden power failure). wait until "the driver software was successfully installed.
5. moved into the program "Odin", that is checked ONLY [Auto Reboot], [F. Reset Time] and [PDA].
6. click the [PDA], navigate to the file-I9003DXKB2 I9003DXKB2-I9003OLBKB2_HOME.tar
7. Click the [Start] button, wait a few minutes until everything is completed. If successful, the SGSL Will restart itself.

8. After the phone restarts itself (going up the small print its own way), wait until the restart again and enter the normal state (lockscreen).

9. turn off "SGSL", attach the sim and microSD, push da hold the power button, then

he he he
   

Related Posts by Categories